| Face Milling (Light to Medium Duty) |
Type No. and Appearance | Specifications | Stock | Features and Insert Size | Work Material |
| Corner angle and depth of cut (inch) | Rake angle (degrees) | Diameter (inch) |  |  |  |  |  |  |  |  |
| A.R. | R.R. |
| TGP4100IAU | | +7 | +1 | 3.150 | 5 | y |
| General purpose milling of ordinary steels and cast iron.
1/2 (I x C) X1/8. |  |  | |
|
|
 |  | 3.937 | 6 | y |
|
| 4.921 | 8 | y |
|
| 6.299 | 8 | y |
|
| 7.874 | 10 | y |
|
| TGP4100BAU | | +7 | +1 | 3.937 | 8 | y | y | General purpose, mainly for high feed cutting of cast iron.
Close pitch version of TGP4100IAU.
1/2 (I x C) X1/8. | | |
|
|
|
 |  | 4.921 | 10 | y | y |
| 6.299 | 12 | y | y |
| 7.874 | 16 | y | y |
| 9.842 | 20 | y | y |
| 12.402 | 24 | y |
|
| TMD4400I-U | | +15 | -3 | 3.150 | 4 | y | y | For machining center. Suited for various work materials.
Adoption of irrugular pitch. Effective in vibration prevention.
Small size and light weight.
1/2 (I x C) X1/8. | | | | | |
 |  | 3.937 | 5 | y | y |
| 4.921 | 6 | y | y |
| 6.299 | 8 | y | y |
| 7.874 | 10 | y |
|
| 9.842 | 12 | y |
|
| 12.402 | 14 | y |
|
| TMD4400B-U | | +15 | -3 | 3.150 | 6 | y | y | For machining center. Suited for various work materials.
Adoption of irrugular pitch. Effective in vibration prevention.
Small size and light weight.
1/2 (I x C) X1/8.
Close pitch version of TMD4400I-U. | | | | | |
 |  | 3.937 | 8 | y | y |
| 4.921 | 10 | y | y |
| 6.299 | 14 | y | y |
| 7.874 | 18 | y |
|
| 9.842 | 22 | y |
|
| TGE4400I-U | | +19 | -2 | 3.150 | 4 | y |
| Larger rake angle than TMD4400I-U.
Excellent free cutting action.
Small size and light weight.
1/2 (I x C) X1/8. | | | | | |
 |  | 3.937 | 5 | y |
|
| 4.921 | 6 | y |
|
| 6.299 | 8 | y |
|
| TMD5400I-U | | +15 | -3 | 3.937 | 4 | y | y | Larger depth-of-cut milling of stainless, die steel and various steels.
Optimum cutting angle for machining of difficult-to-cut material.
5/8 (I x C) X3/16. | | | | | |
 |  | 4.921 | 6 | y | y |
| 6.299 | 6 | y | y |
| 7.874 | 8 | y | y |
| 9.842 | 10 | y | y |
| 12.402 | 12 | y | y |
| THF4400IAU | | +17 | +5 | 3.150 | 5 | y | y | Largest rake angle cutter among the TAC mills.
1/2 (I x C) X1/8. |
|
|
|
| |
 |  | 3.937 | 6 | y |
|
| 4.921 | 8 | y |
|
| 6.299 | 8 | y |
|
| 7.874 | 10 | y |
|
| 9.842 | 12 | y |
|
| 12.402 | 14 | y |
|
| THF5400IAU | | +17 | +5 | 3.150 | 3 | y |
| Largest rake angle cutter among the TAC mills.
5/8 (I x C) X3/16. |
|
|
|
| |
 |  | 3.937 | 4 | y |
|
| 4.921 | 5 | y |
|
| 6.299 | 6 | y |
|
| 7.874 | 8 | y |
|
| 9.842 | 10 | y |
|
| 12.402 | 12 | y |
|
| Face Milling (Heavy Duty) |
| TGP5100IAU | | +7 | +1 | 3.937 | 5 | y |
| General purpose medium and heavy cutting of various steels and cast irons.
By adoption of irregular pitch, effective in vibration prevention.
5/8 (I x C) X3/16. | | |
|
|
|
 |  | 4.921 | 6 | y |
|
| 6.299 | 8 | y |
|
| 7.874 | 10 | y |
|
| 9.842 | 12 | y |
|
| 12.402 | 14 | y |
|
| Square Shoulder Milling |
| TSP4000IAU | | +5 | 0 | 3.150 | 4 | y |
| Square shoulder cutting of various kinds of steel and cast iron.
Adopted irregular pitch.
1/2 (I x C) X3/16. | | | |
|
|
 |  | 3.937 | 6 | y |
|
| 4.921 | 6 | y |
|
| 6.299 | 8 | y |
|
| 7.874 | 10 | y |
|
| Square Shoulder Milling (Light to Medium) |
| TSE4000IAU | | +17 | +5 | 3.150 | 4 | y |
| For square shoulder milling of light alloy and difficult-to-cut material.
Rake angle larger than TSP4000IAU.
1/2 (I x C) X3/16. |
| | | | |
 |  | 3.937 | 6 | y | y |
| 4.921 | 6 | y |
|
| 6.299 | 8 | y |
|
| 7.874 | 10 | y |
|
| Curvature Milling |
| TRD6000-U | | +8 | -3 | 2.362 | 4 | y |
| For rough milling of curvatures of die.
Capable of low depth of cut at high speed.
ø0.787 X 3/16. | | | | | |
 |  | 3.149 | 5 | y |
|
| 4.133 | 6 | y |
|
| 5.512 | 8 | y |
|
| 7.087 | 10 | y |
|
| Finish Milling |
| MS Cutters | | -5 | -30 | 3.937 | 2 | y |
| Exclusively for finish milling of various steel and cast iron.
Micro depth of cut and high feed.
Finish comparable to grinding attainable. | | | |
|
|
 |  | 4.921 | 2 | y |
|
| 5.905 | 4 | y |
|
| 7.874 | 4 | y |
|
| 9.843 | 4 | y |
|
| 11.811 | 4 | y |
|
