| Face Milling Operations |
Type Number | Appearance | Specifications | Stock | Features | Work Material |
| Corner angle and depth of cut (inch) | Rake angle (degrees) | Diameter (inch) |  |  |  |  |  |  |  |  |
| A.R. | R.R. |
| EGD4400-U |  |  | +15 | -3 | 1.969 | 4 | y |
| Face milling with small milling machines.
Various steels, cast iron and difficult-to-cut materials.
Shank-type version of TMD 4400I-U type. |  | | | | |
| 2.480 | 4 | y |
|
| EGE4000-U |  |  | +14 | +1~4 | 1.969 | 3 | y |
| For face milling and shoulder cutting with small milling machines.
For semi-square shoulder cutting.
For various steels and difficult-to-cut materials. |  | | | | |
| 2.480 | 4 | y |
|
| EGE4400-U |  |  | +18 | -3 | 1.969 | 3 | y |
| The number of inserts is minimized to reduce cutting resistance and vibration to machines.
Achieves high feed rates to provide high machining efficiency. | | | | | |
| 2.480 | 3 | y |
|
|
| Face Milling Operations |
| ESD2000-U |  |  | +5~11 | -6~-2 | 0.630 | 1 | y |
| Economical face milling with small inserts. | | | | | |
| 0.787 | 2 | y |
|
0.984 | 2 | y |
|
1.260 | 3 | y |
|
| ESE3000-U |  |  | +7~17 | -9~0 | 0.787 | 1 | y |
| For square shoulder cutting by small horse power milling engines. | | | | | |
| 0.984 | 1 | y |
|
| 1.181 | 2 | y |
|
| 1.378 | 2 | y |
|
| 1.575 | 2 | y |
|
| ESE4000A-U | |  | +17 | +1~4 | 1.969 | 3 | y |
| For square shoulder cutting, die mold and jig fabrication. | | | | | |
| 2.480 | 4 | y |
|
| Chamfering |
| ECP4400-U |  |  | +3 (-8) | +0 | 0.394 | 1 | y |
| For chamfering.
Possible for plunge chamfering of holes. | | | | |
|
| 0.905 | 2 | y |
|
1.417 | 3 | y |
|
| Curvature Cutting |
| ERD6000A-U |  |  | +8 | -5 | 1.969 | 3 | y |
| For rough curvature milling of die.
Most suited for machining flame cut surface. | | | | |
|
| 2.480 | 3 | y |
|
| TBN1000-U |  |  | + | - (+) | 0.375 | 1 | y |
| TAC ball end mills for semi finishing and finishing. | | | |
|
|
| 0.500 | 1 | y |
|
0.625 | 1 | y |
|
0.750 | 1 | y |
|
1.000 | 1 | y |
|
1.188 | 1 | y |
|
| TBF1000-U |  |  | + | - | 1.250 | 1 | y |
| TAC ball end mills for roughing and semi finishing. | | | |
|
|
| 1.500 | 1 | y |
|
2.000 | 1 | y |
|
2.250 | 1 | y |
|
| Slant/Feed/Plunge/End Milling |
| ESD5000-U |  |  | n/a | n/a | 1.575 | 2 | y |
| Spiral-feed end mills capable of pocket milling and large diameter hole making.
Usable on low power machines. | | | | |
|
| 1.969 | 2 | y |
|
| Plunging and Ramping |
| EVP1000-U |  |  | n/a | n/a | 0.625 | 2 | y |
| Multi-functional TAC end mills.
The unique cutting edge geometry allows the cutters to carry out end milling, ramping, plunging and helical-feed drilling.
The long length of the peripheral cutting edges permit large axial depth of cut in end milling.
The staggered insert arrangement allows smooth cutting and chip flow. | | | |
|
|
| 0.750 | 3 | y |
|
| 1.000 | 3 | y |
|
