| Type of Machining | Typical Work Material | Type | Shape | Construction | Feature | |
|---|---|---|---|---|---|---|
| General Drilling | Various steels, ductile cast iron | DSC | -S |  | Solid with spiral oil holes | For deep hole and high efficiency drilling of L/D ratio 3-6. Its performance is 7-10 times to high speed steel drill. |
| -L | ||||||
| Various steels, normal cast iron | TSD |  | Brazed type with oil hole | With high rigidity and good chip control, high feed cutting is possible. With oil hole type. | ||
| TDR |  | TAC drill (common use of tool rotation and fixed) | Uses coated indexable inserts and can perform high speed cutting. L/D ratio <2, tool revolution or fixed tool of common type. | |||
| TDJ |  | TAC drill | Drilling efficiency is equal to brazed tip drill with oil hole. Max. drill depth up to 2.0 x dia. | |||
| Cast iron, light alloys | FDC Drills | -S |  | Solid, straight flute type with oil hole | For high feed deep drilling. Max. drill depth up to 8.0 x dia. | |
| -L | ||||||
| Deep hole drilling | Various steels, cast iron, light alloys | Gun Drills |  | Brazed type | For high accuracy deep hole drilling. General purpose type applicable to many kinds of work material. | |
| MC Gun Drills |  | Brazed type | For deep hole (L/D 5-20) drilling. By without guide bush and lower pressured cutting fluid. | |||
| Various steels, cast iron | TDP |  | TAC drill, with pilot drill | A pilot drill is attached on the top and tool rigidity at time of cutting is high. Internal oiling type. L/D ratio 2-5 drilling. | ||
| Various steels, stainless steel | SF·SF-A Gun Drills |  | Brazed type | For high accuracy deep hole drilling. By unique chip breaker high feed drilling of steel material possible. | ||
| Cast iron, light alloys | HF Gun Drills |  | Brazed type | For high accuracy deep hole drilling. With double cutting edge high feed drilling of cast iron and light alloy possible. | ||
| Finishing(for deep hole) | Various steels, cast iron, light alloys | Gun Reamers |  | Brazed type | For high accuracy finish working of deep hole. | |
| Shape | Applicable TAC drills |
|---|---|
 | TAC Drills TDR |
 | TAC Drills TDR |
 | TAC Drills TDP |
 | TAC Drills TDJ |
 | TAC Drills TDJ |